news
Plate, Sheet, Strip: ASTM B333, ASME SB333
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification2 covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Table 1, for use in general corrosive service.
|
Element |
Composition Limits, % |
|
|||
|
Alloy |
Alloy |
Alloy |
Alloy |
Alloy |
|
|
Nickel |
remainderA |
remainderA |
65.0 min |
remainderA |
Bal |
|
Molybdenum |
26.0–30.0 |
26.0–30.0 |
27.0–32.0 |
26.0–30.0 |
21.0-25.0 |
|
Iron |
4.0–6.0 |
2.0 max |
1.0–3.0 |
1.0–6.0 |
5.0-8.0 |
|
Chromium |
1.0 max |
1.0 max |
1.0–3.0 |
0.5–1.5 |
6.0-10.0 |
|
Carbon, max |
0.05 |
0.02 |
0.01 |
0.01 |
0.01 |
|
Silicon, max |
1.0 |
0.10 |
0.10 |
0.05 |
0.10 |
|
Cobalt, max |
2.5 |
1.00 |
3.0 |
2.5 |
1.0 |
|
Manganese, |
1.0 |
1.0 |
3.0 |
1.5 |
1.0 |
|
Phosphorus, |
0.04 |
0.04 |
0.030 |
0.04 |
0.025 |
|
Sulfur, max |
0.03 |
0.03 |
0.010 |
0.01 |
0.01 |
|
Vanadium |
0.2–0.4 |
... |
0.20 max |
... |
... |
|
Nickel plus |
... |
... |
94.0–98.0 |
|
... |
|
Aluminum |
... |
... |
0.50 max |
0.1–0.5 |
0.5 |
|
Columbium |
... |
... |
0.20 |
|
... |
|
Copper, max |
... |
... |
0.20 |
0.5 |
0.5 |
|
Tantalum, |
... |
... |
0.20 |
|
... |
|
Titanium, |
... |
... |
0.20 |
|
... |
|
Tungsten, |
... |
... |
3.0 |
|
... |
|
Zirconium, |
... |
... |
0.10 |
|
... |
|
Magnesium, |
... |
... |
... |
... |
... |
|
Alloy |
Thickness, |
Tensile Strength, |
Yield Strength |
Elongation |
Rockwell |
|
|
|
Sheet and Strip |
|
|
|
|
N10001 |
Under 3/16 (4.76) |
115 000 (795) |
50 000 (345) |
45 |
100 HRB |
|
N10665 |
Under 3/16 (4.76) |
110 000 (760) |
51 000 (350) |
40 |
100 HRB |
|
N10675 |
Under 3/16 (4.76) |
110 000 (760) |
51 000 (350) |
40 |
100 HRB |
|
N10629 |
Under 3/16 (4.76) |
110 000 (760) |
51 000 (350) |
40 |
100 HRB |
|
N10624 |
Under 3/16 (4.76) |
104 000 (720) |
46 000 (320) |
40 |
100 HRB |
|
|
|
Plate |
|
|
|
|
N10001 |
3/16 to 21/2 in. (4.76 to 63.5 mm), incl |
100 000 (690) |
45 000 (310) |
40 |
100 HRB |
|
N10665 |
3/16 to 21/2 in. (4.76 to 63.5 mm), incl |
110 000 (760) |
51 000 (350) |
40 |
100 HRB |
|
N10675 |
3/16 to 21/2 in. (4.76 to 63.5 mm), incl |
110 000 (760) |
51 000 (350) |
40 |
100 HRB |
|
N10629 |
3/16 to 21/2 in. (4.76 to 63.5 mm), incl |
110 000 (760) |
51 000 (350) |
40 |
100 HRB |
|
N10624 |
3/16 to 21/2 in. (4.76 to 63.5 mm), incl |
104 000 (720) |
46 000 (320) |
40 |
100 HRB |
1.2 The following products are covered under this specification:
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.